SteerClear Logo SteerClear®
☰
Test Prep

Czech Driving Test: Common Fail Reasons and Fixes

The faults that most often end the Czech driving exam, from roundabout exits to trams and speed changes, and how to work on each one in driving school.

2026-11-17 5 min read

The Czech driving exam is short on paper: at least 10 minutes for the first part and at least 20 minutes of driving in traffic. In that time an examiner from the ORP office watches how you handle the roads around the town, and a single serious fault can end the exam. Knowing which faults come up most often lets you and your instructor spend your remaining lessons where they count.

In the Czech Republic all practice before the exam happens in driving school, with your instructor, in the school's car. That is also the car you take the exam in, with your instructor in the instructor's seat. So everything below is something to work on in lessons.

Why it is worth getting right early

After three unsuccessful attempts at the driving part, you have to go back for more training before you can try again, and that retraining is expensive. A fault you fix in a lesson now is far cheaper than one you discover on your third attempt.

The faults that come up most

1. Roundabout exits

In the Czech Republic you signal when leaving a roundabout. Learners forget the signal, give it too late, or signal without checking the mirror first. In lessons: ask your instructor to take you round the main roundabouts near your ORP office repeatedly, using different exits, and say "mirror, signal, exit" out loud each time.

2. Trams

In towns with trams, such as Praha, Brno, Ostrava, Plzeň and Olomouc, tram tracks cross junctions the exam is likely to use. Learners misjudge who has priority or turn across the tracks without looking for a tram. In lessons: drive the busy tram junctions near your exam location more than once, and talk through the priority at each before you reach it.

3. Observation at junctions

A quick glance both ways is not enough. Examiners look for a proper look, then a second look for cyclists and pedestrians. In lessons: ask your instructor to tell you each time a check was too quick, until the full look becomes a habit.

4. Speed changes out of town

The exam has to include roads outside built-up areas, so the drive will take you past the signs where the limit rises and falls. Missing the change in either direction is a common fault. In lessons: drive the roads out of your exam town and call out each speed sign as you see it.

5. The first part

Moving off, reversing and parking come before the drive in traffic. Because they feel like the easy part, learners stop practising them, and then a nervous reverse goes wrong. In lessons: keep a few minutes of manoeuvres in every lesson right up to the exam.

6. Slip roads and merging

Where the exam area has a motorway slip road or a tunnel, the exam rules expect it to be used. Joining too slowly or without a clear check of the lane you are merging into is a typical fault. In lessons: if your exam town has a slip road nearby, ask your instructor to include it several times.

7. Lights and basics

Small things count. In the Czech Republic you drive with your lights on at all times, so make switching them on part of your routine before you move off, along with your seatbelt and mirrors.

Turning faults into a plan

Preview the roads at home

SteerClear has practice routes from exam locations in the largest Czech towns. Preview one at home to see where the roundabouts, tram tracks and speed changes are, then drive it with your instructor in a lesson, with turn-by-turn navigation and live scoring. These are practice routes on the roads around each office, not the route an examiner will choose on the day.

Find your exam location on the Czech Republic exam locations page and read the Czech practical driving test guide.

Practise the routes at your test centre

Live scoring · local routes · Mac, your AI driving coach.

Get SteerClearGet SteerClear · App Store